期刊目次

加入编委

期刊订阅

添加您的邮件地址以接收即将发行期刊数据:

Open Access Article

Journal of Electrical Engineering and Automation. 2022; 1: (4) ; 79-82 ; DOI: 10.12208/j.jeea.20220059.

Common Faults and Maintenance of Electric Automation Control Equipment
浅析电气自动化控制设备中常见故障及维护

作者: 李海 *

中铝贵州工业服务有限公司 贵州贵阳

*通讯作者: 李海,单位:中铝贵州工业服务有限公司 贵州贵阳;

发布时间: 2022-11-27 总浏览量: 40

摘要

随着现代制造技术的快速发展,传统手工劳作模式已经逐步被电气自动化控制技术所替代,在此形势下工业制造领域中电气设备的应用得到了普及推广,也逐渐成为企业生产制造不可或缺的一个主要组成部分,但是电气设备在长期运行过程中不可避免的会产生一些故障问题,故障较为严重的情况下可能直接导致企业生产中断,严重影响企业的生产效率。因此企业须针对生产线中的电气设备故障进行深入分析,找出导致电气设备故障的主要原因,明确设备检修现状,并在此基础上制定出更加合理的预防和应对措施,通过检修技术的合理应用来实现故障及时排除,进而保障电气设备的高效化运行,同时也可以实现企业电气设备生产效益的全面提升。

关键词: 电气自动化;设备;故障;维修和预防

Abstract

With the rapid development of modern manufacturing technology, the traditional manual labor mode has been gradually replaced by the electrical automation control technology. Under this situation, the application of electrical equipment in the industrial manufacturing field has been popularized, and has gradually become an indispensable part of enterprise production and manufacturing. However, electrical equipment will inevitably produce some fault problems in the long-term operation process, Serious failures may directly lead to the production interruption of the enterprise and seriously affect the production efficiency of the enterprise. Therefore, enterprises must conduct in-depth analysis on electrical equipment failures in the production line, find out the main causes of electrical equipment failures, clarify the current situation of equipment maintenance, and develop more reasonable prevention and response measures on this basis. Through the reasonable application of maintenance technology, failures can be eliminated in a timely manner, so as to ensure the efficient operation of electrical equipment, and at the same time, the overall improvement of the production efficiency of electrical equipment of enterprises can be achieved.

Key words: electrical automation; Equipment; Failure; Maintenance and prevention

参考文献 References

[1] 陈峰.故障预防和检修技术在电气自动化控制设备的应用[J].中国井矿盐,2022,53(03):27-28.

[2] 卢宪强.工业电气自动化控制中变频调速技术的应用探究[J].电子元器件与信息技术,2022,6(04):202-205.

[3] 李帅.人工智能技术在电气工程自动化控制中的应用[J].光源与照明,2021(10):104-106.

[4] 宗鹏.电气自动化控制中应用人工智能技术的思路与策略研究[J].科技创新与应用,2021,11(24):159-161.

[5] 钱原铬.电气自动化控制设备中PLC技术应用与策略分析[J].电气开关,2021,59(04):81-83.


引用本文

李海, 浅析电气自动化控制设备中常见故障及维护[J]. 电气工程与自动化, 2022; 1: (4) : 79-82.